Leaderboard

سيرفر : function read () open = fileOpen("config.txt") reading = fileRead(open,46) fileFlush(open) fileClose(open) return reading end link = {} function readid () opentwo = fileOpen("config.txt") fileSetPos(opentwo,48) readingtow = fileRead(opentwo,11) fileFlush(opentwo) fileClose(opentwo) return readingtow end token = read() chat_id = readid() print(token) print(chat_id) function result(sum) print(sum) end function sendMsg(Text) link[1] = "https://api.telegram.org/bot"..token.."/sendMessage".."?chat_id="..chat_id.."&text="..Text.."" print(link[1]) callRemote (link[1], result,Text) end function sendphoto(photo) link[2] = "https://api.telegram.org/bot"..token.."/sendPhoto".."?chat_id="..chat_id.."&photo="..photo.."" callRemote (link[2],result,photo) end function sendvideo(video) link[3] = "https://api.telegram.org/bot"..token.."/sendVideo".."?chat_id="..chat_id.."&video="..video.."" callRemote (link[3],result,video) end function sendAudio(Audio) link[4] = "https://api.telegram.org/bot"..token.."/sendAudio".."?chat_id="..chat_id.."&audio="..Audio.."" callRemote (link[4],result,Audio) end function sendDocument(Document,Texts) link[5] = "https://api.telegram.org/bot"..token.."/sendDocument".."?chat_id="..chat_id.."&document="..Document.."&caption="..Texts.."" callRemote (link[5],result,Document) end function sendSticker(Sticker) link[6] = "https://api.telegram.org/bot"..token.."/sendSticker".."?chat_id="..chat_id.."&sticker="..Sticker.."" callRemote (link[6],result,Sticker) end function sendChatAction(action) if token and chat_id and action then link[7] = "https://api.telegram.org/bot"..token.."/sendChatAction".."?chat_id="..chat_id.."&action="..action.."" callRemote (link[7],result,action) end end -- sendChatAction("") --sendMsg("hi") --sendChatAction("upload_photo") --sendSticker("https://www.gstatic.com/webp/gallery/1.webp") -- sendDocument("https://www.mathscinotes.com/wp-content/uploads/2016/02/Adler-Mortimer-How-To-Read-A-Book.pdf","this pdf") --sendAudio("https://g.top4top.io/m_488rkvrd2.mp3") -- sendvideo("https://p.top4top.io/m_872tuac51.mp4") -- sendphoto("https://j.top4top.io/i_1eb6c9296e1.png") اهم شي تحط تويكن و id chat وبعدين تقدر تحكم بالبوت خاص بيك و تربطه مع مود خاص بيك و بسهل طريقه ومش معقده وللي حاب يضيف ويكمل باقي فكشنات بيلقي باقي فكشنات هنا https://telegram-bot-sdk.readme.io/reference ملف config.txt put token here put id chat here

I don't know why I even have to point this out since this is something I figured out automatically in my early days of MTA scripting. But it seems necessary because I see people using Lua tables but not taking advantage of their flexibility. Very brief overview of tables as arrays Anyway, Lua tables are often used as arrays - that is, data structures that store values under consecutive integer keys starting at 1 (0 in most other languages, but that's another story), making a sequence. Various functions that operate on tables, including those in table namespace, treat them as arrays. Take this example: local fruits = {} table.insert(fruits, "apple") table.insert(fruits, "banana") table.insert(fruits, "lemon") table.insert(fruits, "orange") It creates an empty table, then uses table.insert to insert values. Because table.insert treats the table as an array and because it inserts at the end of the sequence if position argument is omitted, we end up with values "apple", "banana", "lemon" and "orange" values under keys 1, 2, 3 and 4 respectively. Using index operator [], you can retrieve the associated value from the key: -- assuming standalone Lua, using print -- replace with outputChatBox or another output function if running in MTA print(fruits[1]) -- outputs: apple print(fruits[2]) -- outputs: banana print(fruits[3]) -- outputs: lemon print(fruits[4]) -- outputs: orange Tables as sets However, table keys don't have to be integers. You can use any value except nil and nan. Strings, other tables, MTA elements. Therefore, if the order of values is irrelevant and the values are unique, instead of inserting the value under some key, you can use that value itself as the key. And set the associated value to true: local fruits = {} fruits["apple"] = true fruits["banana"] = true fruits["lemon"] = true fruits["orange"] = true Now we have a table with keys "apple", "banana", "lemon" and "orange", while the associated value true is only used to indicate the presence of key and nothing else. That effectively makes the table a set, a collection of unique values with no particular order. Usage and comparison Insertion So we have two different ways to insert values: -- array table.insert(fruits, "apple") -- set fruits["apple"] = true This alone doesn't say much. Both operations are simple and take a roughly constant amount of time to execute. However, it makes other operations very different. Removal Because arrays require you to know the key to remove the value, you have to loop through the array to find it. In contrast, with sets you can just assign nil (because nil is the value for unassigned fields): -- array function removeFromArray(array, value) for i, v in ipairs(array) do if v == value then table.remove(array, i) end end end removeFromArray(fruits, "banana") -- set fruits["banana"] = nil Arrays are very inefficient for this if there is a large number of values, because the more values there are in total, the longer the removal of a single value will take - whereas removing from the set will take more or less the same. Checking if exists Checking for presence of a value is a lot like removal, you need to know where the value is, so arrays require looping. With sets, you just retrieve the associated value. If the checked value exists, the associated value will be true, otherwise it will be nil. -- array function existsInArray(array, value) for i, v in ipairs(array) do if v == value then return true end end return false end if existsInArray(fruits, "lemon") then print("found") else print("not found") end -- set if fruits["lemon"] then print("found") else print("not found") end Arrays are again inefficient in the same way. Looping Looping is roughly the same, but as far as I know, Lua tables are optimized to be used as arrays, so I guess looping may be a little faster for arrays than sets. I have never checked this myself. -- array for key, value in ipairs(fruits) do print("found value: "..value) end -- set for value in pairs(fruits) do print("found value: "..value) end Notice that ipairs is used for the array and pairs is used for the set. pairs will work for the array as well, but the order will be unspecified. ipairs is meant to be used on arrays, it starts at index 1 and increments until no value is found. Size retrieval Lua has length operator #, which returns the array length when used on tables. But there is no built-in operator or function to retrieve the total number of fields in a table, so it takes more to get the size of a set. -- array local count = #fruits print("fruit count: "..count) -- set function getSetSize(set) local count = 0 for value in pairs(set) do count = count+1 end return count end local count = getSetSize(fruits) print("fruit count: "..count) This makes size retrieval much more efficient for arrays than sets because the more values the set has, the longer it takes to loop through them. That's speaking of sets in their simplest form though. You can have a structure like this: local fruits = { count = 0, values = {} } And modify the count every time a value is inserted or removed. Then you can retrieve the size simply by reading fruits.count, which is efficient. But then other operations have to be altered too so we're not getting into this here. Checking if empty Checking if a collection is empty means checking if its size is 0. For arrays, nothing changes, but for sets it can be done efficiently. -- array if #fruits == 0 then print("array is empty") else print("array is not empty") end -- set if next(fruits) == nil then print("set is empty") else print("set is not empty") end next is a Lua function for traversing the table. It's used by pairs too, called once for each pair. But here we call next directly. Its first returned value is one of the keys in the table, or nil if no key is found. Conclusion For some of the most common operations, sets are both more efficient and simpler to operate on than arrays. In its simplest form, it loses against array in size retrieval, but you can keep track of size separately. When you want to store unique values and their order is unimportant, using tables as sets is probably the right choice. Syntax summary: tbl = {} -- insertion tbl[value] = true -- removal tbl[value] = nil -- checking if exists if tbl[value] then end -- looping for value in pairs(tbl) do end -- checking if empty if next(tbl) == nil then end

Ocorreu tudo certo então ?

https://github.com/multitheftauto/mtasa-blue/pull/2169 draft pull request created

نصيحة من أخ تعلم برمجة أو استأجر مبرمج لأن صدقني راح تتعب كثير لأن صعب جداً الشباب يساعدونك ويعلمونك وش تسوي بالضبط وانت ماعندك أي خلفية بالبرمجة

Welcome to the forums @VKS Your thread has been moved into the correct forum (Portuguese)

function hit(element) if Markers.ID[source] then if getElementType(element) == "player" then if isObjectInACLGroup("user." ..getAccountName(getPlayerAccount(element)), aclGetGroup("AclPermitida")) then -- No lugar de "AclPermitida" troque para ACL que você deseja. triggerClientEvent(element, "TS:AbrirFArmas", element) end end end end addEventHandler("onMarkerHit", resourceRoot, hit)

الاكواد الي تحتاجها 1- setPedStat 2- setWeaponProperty 3- onVehicleStartEnter

Olá, substituia isso em ser script, isso ira verificar se a Conta da pessoa que passar no marker ira estar na AclPermitida(Apenas alterar para o nome que deseja) function hit (element) if isObjectInACLGroup ( "user." ..getAccountName(getPlayerAccount(thePlayer)), aclGetGroup ("AclPermitida")) then if Markers.ID[source] then if getElementType(element) == "player" then triggerClientEvent(element, "TS:AbrirFArmas", element) end end end end addEventHandler("onMarkerHit", resourceRoot, hit) Espero ter ajudado, caso tenha duvidas so falar

By "remove only the 3 big cities", do you mean remove the cities but keep the rest of the map? Then I suggest you make a list of object model IDs and positions to be removed, then loop through that list and call removeWorldModel for each entry. But building the list itself is the hard part. I don't know if MTA map editor has any functionality that helps this. If it doesn't, then there are several things you can do. You can use some GTA SA map editor to pick out the objects. You can take the IDs and positions directly from .ipl files in GTA SA data. processLineOfSight returns model and position of the world object if it hits one. You can either use it to pick out the objects manually or make a loop that goes through a large area and collects the object data. processLineOfSight won't work on objects that are not loaded so you have to make sure you are close enough to objects you're trying to pick. Another potential problem with looping over an area is that you may miss small objects, and if you shoot lines of sight more densely, it will take longer to process the whole area. But since that only needs to be done once, it's okay as long as all objects are detected. Or you can loop over the area, then go through it manually to pick the remaining objects.

This is really nice! Been out of the game for a while but will definitely check this out sometime. Cheers.

Freeroam cancela as animações ao tentar pular. Desligue-o ou edite o resource dele para não fazer isso.

It should be available with in the element property window.