darkdreamingdan Posted July 12, 2005 Posted July 12, 2005 make sure you have the newest server. you have to use the server patch 1 for mtama to work VCP FOREVER!
(UvH)bLinD Posted July 12, 2005 Posted July 12, 2005 ok,i've fixed now i dont know how to make admins
Drake Posted July 12, 2005 Posted July 12, 2005 anyone have a solution for my crc problem cuz no offense but trying to contact Oli on msn is pointless
Aeron Posted July 12, 2005 Posted July 12, 2005 anyone have a solution for my crc problemcuz no offense but trying to contact Oli on msn is pointless resinstall/download "Never argue with an idiot. They bring you down to their level and beat you with experience." "Arguing on the internet is like the Special Olympics. Even if you win, you're still retarded."
Oli Posted July 12, 2005 Posted July 12, 2005 anyone have a solution for my crc problemcuz no offense but trying to contact Oli on msn is pointless im a busy man Proud member of Multi Theft Auto Founder of Full Metal Jacket Creator of MTA:mA:GRS http://www.mtafmj.com http://www.full-fat.com
Drake Posted July 13, 2005 Posted July 13, 2005 ya i can realize that its just frustrating to be all excited about a new script then being bummed because you cant play it
(UvH)bLinD Posted July 14, 2005 Posted July 14, 2005 hello again.. when i set the ping to 800 it kicks people whose ping is 200 and 400? any help for this..ah and it also kicks tehem when i turn it off
MrJax Posted July 14, 2005 Posted July 14, 2005 ya i can realize that its just frustrating to be all excited about a new script then being bummed because you cant play it Why don't you just post the exact problem here, i don't see how you would be getting crc check errors with a un-modified script.
Harry Posted July 14, 2005 Posted July 14, 2005 - Dont you have antoher ping kicking script enabled? - Does the script kick the ppl with the messege ping too high - Why the hell 800? Dont se it at all at those pings Oh, and btw, these problems arent MTAMA problems, post them in the GRS thread plz
(UvH)bLinD Posted July 15, 2005 Posted July 15, 2005 - Dont you have antoher ping kicking script enabled? - Does the script kick the ppl with the messege ping too high - Why the hell 800? Dont se it at all at those pings Oh, and btw, these problems arent MTAMA problems, post them in the GRS thread plz - i dont have another pingkicking script -yes - i dont know where's the GRS thread
Guest Posted August 16, 2005 Posted August 16, 2005 Hi all. I'm running mIRC 6.16 and MTAma 3.23. I'm trying to connect to a remote server (admin+). I've set all the General>options needed, and entered the correct details into the right hand pane. Also when I click close (from General>options), then return to options, they need to be selected again/not being saved. Whenever I press Connect, I get nothing at all. Like it's a dead button. Anyone had this? Btw: It took longer than I thought to read 16 pages of problems Note to self - Take speed reading classes brym
Aeron Posted August 16, 2005 Posted August 16, 2005 Hi all. I'm running mIRC 6.16 and MTAma 3.23. I'm trying to connect to a remote server (admin+). I've set all the General>options needed, and entered the correct details into the right hand pane. Also when I click close (from General>options), then return to options, they need to be selected again/not being saved. Whenever I press Connect, I get nothing at all. Like it's a dead button. Anyone had this?Btw: It took longer than I thought to read 16 pages of problems Note to self - Take speed reading classes brym Did you see something in the "Status window" of mIRC? "Never argue with an idiot. They bring you down to their level and beat you with experience." "Arguing on the internet is like the Special Olympics. Even if you win, you're still retarded."
Guest Posted August 16, 2005 Posted August 16, 2005 Hi Aeron, Thanks for your quick reply given how busy you are. At the time, all I saw in mIRC was the confirmation message when I loaded mta.mrc. Nothing else. Also the status window inside MTAma was empty the whole time. I've since restarted my machine though, and it works fine. I think it was a bandwidth consumption problem (i.e. my download at the time not letting enough bw be made available). Out of curiosity, is there a minimum bandwidth amount needed to run MTAma? Thanks for a great addition Aeron et al brym
Aeron Posted August 16, 2005 Posted August 16, 2005 Hi Aeron,Thanks for your quick reply given how busy you are. At the time, all I saw in mIRC was the confirmation message when I loaded mta.mrc. Nothing else. Also the status window inside MTAma was empty the whole time. I've since restarted my machine though, and it works fine. I think it was a bandwidth consumption problem (i.e. my download at the time not letting enough bw be made available). Out of curiosity, is there a minimum bandwidth amount needed to run MTAma? Thanks for a great addition Aeron et al brym Depends to how musch servers you connect, and what the maxiumum players a server has. 56k can handle a 16-player server just fine. "Never argue with an idiot. They bring you down to their level and beat you with experience." "Arguing on the internet is like the Special Olympics. Even if you win, you're still retarded."
Harry Posted August 18, 2005 Posted August 18, 2005 It depends primary on the number and the load of the scripts you are running. Some scripts tend to push the processor load a lot, and you cant play MTA together with running the MTAMA scripts. But just try, you'll see.
Guest Posted August 23, 2005 Posted August 23, 2005 hey im haveing trouble..... when i first downloaded the mIRC admin when i connected it told me incompatable version..... then i was told to do /update..... so i did everything was all fine then i clicked install when it finished downloading.... it sed do u wanna activate the script or what ever and i clicked yes (like the manule seys to) then it tells me ERROR: File 'mta.data.ini' not found!Make sure it's ion the same folder as 'mta.mrc'. i dont understand where im going rong with this installation some one help please!
Harry Posted August 25, 2005 Posted August 25, 2005 Downlaod mta.data.ini from http://www.aeron.tk put in in your mIRC forder (or other folder you installed MTAMA into) Rock!
Guest Posted November 24, 2005 Posted November 24, 2005 I just downloaded and installed mIRC (latest) with your files (latest) in a mIRC subdir. I loaded everything as per usual and everything goes well up until i go to connect to the server from withing MTAma (the server is running and playable on internal lan). When I connect from MTAma I get a CRC error, but it passed the test upon initializing the script. When I do an event check in mIRC I get an error in the status window that says: Invalid Parameters: $did (line 1290, mta.mrc) I am not a mIRC pro so I cannot interpret the error by code, however I was hoping maybe you could make some sense of it. It doesn't only come up when I do an event check. Cheers and Thanks
Aeron Posted November 25, 2005 Posted November 25, 2005 I just downloaded and installed mIRC (latest) with your files (latest) in a mIRC subdir. I loaded everything as per usual and everything goes well up until i go to connect to the server from withing MTAma (the server is running and playable on internal lan). When I connect from MTAma I get a CRC error, but it passed the test upon initializing the script.When I do an event check in mIRC I get an error in the status window that says: Invalid Parameters: $did (line 1290, mta.mrc) I am not a mIRC pro so I cannot interpret the error by code, however I was hoping maybe you could make some sense of it. It doesn't only come up when I do an event check. Cheers and Thanks If you have alot of scripts then the script-double-event-checker makes a overflow, you cna just ignore it. About the CRC error: dont modify the files! Just get the right mta.mrc and mta.dll from http://www.aeron.tk "Never argue with an idiot. They bring you down to their level and beat you with experience." "Arguing on the internet is like the Special Olympics. Even if you win, you're still retarded."
Guest Posted November 25, 2005 Posted November 25, 2005 If you have alot of scripts then the script-double-event-checker makes a overflow, you cna just ignore it.About the CRC error: dont modify the files! Just get the right mta.mrc and mta.dll from http://www.aeron.tk I have not changed anything. Even when I completely recopy all the fresh files and start it up in default condition, it all works up until I try to connect to the server from Mtama. When I originally got it, I did change it, but it wouldn't even initialize so I've learnt that one. I recopied it about 10 times now. I ran the 2nd latest version of MTA.mrc with MTAma and it worked but when in game, the MTAma code didn't change the game. It just played normal VC:DM. Any other suggestions? (ps - I'm relatively noob like with mIRC and mIRC scripting! It may be something simple that Im missing.) Thanks again
damnet007 Posted November 25, 2005 Posted November 25, 2005 yes i also get no crc errors, i never used to but after the last update i get atleast 4-5 everyday. it happens everytime the odd user comes onto my server, and then people get annoyed when i close mirc and reopen it as it turns off the scripts for a while.
Guest Posted November 25, 2005 Posted November 25, 2005 I have MTAma sorted and working now, however i still get the CRC errors on latest version. Runs great on previous version tho.
Guest Posted December 8, 2005 Posted December 8, 2005 ill check it if i'm @ home i cant get a ip adress for mta gta3 how doi get 1
Recommended Posts