MTA textures bug and low fps, pls help me

[Latszi123]

Hey guys, i have a big problem here.

I bought a Lenovo Ideapad 320-15ABR with AMD A12-9720P cpu, 4 GB DDR4 ram,  and AMD Radeon 530 2GB graphic card. I think this config must be good for MTA SA. But the problem is that if i try to connect to a server, the textures aren't loading, and i lagging like hell. Here is a picture similar to what i experienced:

I think my dedicated and integrated graphic card isn't configurated well. There is my MTA Diag pastebin: https://pastebin.mtasa.com/223811422

Please help me solve this problem. 

Thank you!

[NmLa]

2 minutes ago, Latszi123 said:

Hey guys, i have a big problem here.

I bought a Lenovo Ideapad 320-15ABR with AMD A12-9720P cpu, 4 GB DDR4 ram,  and AMD Radeon 530 2GB graphic card. I think this config must be good for MTA SA. But the problem is that if i try to connect to a server, the textures aren't loading, and i lagging like hell. There is a  picture about what i experienced: https://imgur.com/a/Mur0zK9 

I think my dedicated and integrated graphic card isn't configurated well. There is my MTA Diag pastebin: https://pastebin.mtasa.com/223811422

Please help me solve this problem. 

Thank you!

much objects edited need much from ur space maybe on ram or vega c

objects like vehicles .

[Latszi123]

But my previous PC was a lot weaker than my current laptop, and i didn't experience problems like this. I had 30-40fps on the same server.

[Dutchman101]

The screenshot that you provided shows a problem that others encountered when their Windows WMI was malfunctioning. MTA relies on WMI to communicate with hardware such as your GPU, assigning streaming memory etc, and a failure with especially that can lead to this problem.

This script will perform some operations that include rebuilding your WMI controller; https://mirror.multitheftauto.com/mtasa/utils/servicing.bat

1) Download the .bat file, rightclick and select 'Run as Administrator' (make sure, or else it won't work out correctly)

2) Wait until it completes; don't assume it hangs, may appear so but it may take a while, once it's done it will close itself. Don't press any keys or use your PC before that.

3) When it has closed itself, restart your PC, re-install MTA once and try again.

Please let me know of the results, @Latszi123

[Latszi123]

@Dutchman101 Thank you for yout help, Im currently running that .bat file, I really hope that it will help! I will inform you about the results!

[Latszi123]

@Dutchman101 After the restart at the boot sector it says that: Scanning and repairing drive c, and it pauses at 14%.. what should i do now?

[Latszi123]

I still have this problem, help me pls

[Dutchman101]

On 26/12/2018 at 19:33, Latszi123 said:

I still have this problem, help me pls

Did the problem disappear right after you performed those steps, only to re-appear now? I cannot imagine that you just left when it wasn't yet solved after that reboot. Knowing this is important for further instructions.

 

Please download and run MTADiag and follow the instructions.

Post any Pastebin URL MTADiag gives you in this topic.

[Latszi123]

I just left it because i was so upset... 

Here is the MTADiag result https://pastebin.mtasa.com/250468120

 

Note: Dutchman continued supporting me in PM, so we're done here.