Raspberry pi model 3B+

[greenops011]

So I have a Raspberry Pi 3 B+, and I’m wanting to use it to run a small server. Max amount of players I would allow are 6 as it would be a private dev/clan server.

 

These are the specs according to magpi.raspberrypi.com:

 

• SoC: Broadcom BCM2837B0 quad-core A53 (ARMv8) 64-bit @ 1.4GHz
• GPU: Broadcom Videocore-IV
• RAM: 1GB LPDDR2 SDRAM
• Networking: Gigabit Ethernet (via USB channel), 2.4GHz and 5GHz 802.11b/g/n/ac Wi-Fi
• Bluetooth: Bluetooth 4.2, Bluetooth Low Energy (BLE)

Do you guys think that would be sufficient enough to run the small server? Don’t know if it would help in determining this, but I’d probably be using the oG roleplay script on the server

[greenops011]

On 31/07/2022 at 08:34, greenops011 said:

So I have a Raspberry Pi 3 B+, and I’m wanting to use it to run a small server. Max amount of players I would allow are 6 as it would be a private dev/clan server.

 

These are the specs according to magpi.raspberrypi.com:

 

• SoC: Broadcom BCM2837B0 quad-core A53 (ARMv8) 64-bit @ 1.4GHz
• GPU: Broadcom Videocore-IV
• RAM: 1GB LPDDR2 SDRAM
• Networking: Gigabit Ethernet (via USB channel), 2.4GHz and 5GHz 802.11b/g/n/ac Wi-Fi
• Bluetooth: Bluetooth 4.2, Bluetooth Low Energy (BLE)

Do you guys think that would be sufficient enough to run the small server? Don’t know if it would help in determining this, but I’d probably be using the oG roleplay script on the server

guessing noone has any thoughts on this?

[-ffs-PLASMA]

It depends on what type of gamemode/resources you run on your server.

Other than that you have to try it out by yourself given that no one answered.

 

Edit: Also keep in mind the ARM binary is in a testing stage therefore server crashes might occur due to the binary itself, not the resources.

Edited August 13, 2022 by -ffs-PLASMA