Towncivilian

I agree wholeheartedly with Dutchman101. We tried everything we could, your graphics card is simply too anemic to play MTA at an acceptable frame rate. Upgrade your graphics card.

Please install the following: Graphics driver Audio driver Provide another MTADiag log after installing.

Please run MTADiag again and enter 'n' when asked. Paste the MTADiag log link here.

Please don't use a registry cleaner ever again. They do nothing at best, and can cause significant problems at worst. Why don't you want to install some Windows Updates? KB971033? Get a legit copy of Windows and come back.

It's hard to say - it might or might not, but any improvement probably will not be significant. Provide another MTADiag log once you've got everything set up again so we can make sure you are not missing any drivers.

Please download and run MTADiag and follow the instructions. If MTADiag doesn't launch, please install Visual C++ 2012 runtimes (download and install vcredist_x86.exe) and try again. Press 'n' when asked. Post any Pastebin URL MTADiag gives you.

Please download and run MTADiag and follow the instructions. If MTADiag doesn't launch, please install Visual C++ 2012 runtimes (download and install vcredist_x86.exe) and try again. Press 'n' when asked. Post any Pastebin URL MTADiag gives you.

1: there is no onboard graphics, you *are* using the GT610 all the time. The card is very anemic though, you should try to upgrade to a better card. Even a GT620 will probably double your performance. 2: compressed air will blow the dust out of your computer. Take it outside as it may be very dusty. 3: your power supply's voltages are barely within spec. Consider buying a Corsair CX430, it is a very good and inexpensive unit.

There is no Intel onboard graphics enabled on Just_test's machine. Check the WMIC output, there's only the nVidia card. Install the AMD Chipset drivers. Why do you have about 500 6to4 tunnel networking adapters? That isn't right, but it probably isn't causing your issues.

Please provide a fresh MTADiag log so we can verify all drivers are up to date.

Please redownload MTADiag and try again. If it still crashes, run Windows Update, then try again.

Please install the following: Graphics driver Audio driver Provide another MTADiag log after installing.

Please download and run MTADiag and follow the instructions. If MTADiag doesn't launch, please install Visual C++ 2012 runtimes (download and install vcredist_x86.exe) and try again. Press 'n' when asked. Post any Pastebin URL MTADiag gives you.

Rename M3A78-EM-ASUS-2701.ROM to BIOS.ROM and then boot back to the USB flash drive and run AFUDOS238.exe BIOS.ROM.

Please download and run MTADiag and follow the instructions. If MTADiag doesn't launch, please install Visual C++ 2012 runtimes (download and install vcredist_x86.exe) and try again. Press 'n' when asked. Post any Pastebin URL MTADiag gives you.

Reboot your PC with the flash drive still plugged in. You should reach a DOS prompt (C:> with flashing line). Type AFUDOS238 M3A78-EM~1.ROM then press Enter. The flash process should begin. If it does not automatically boot to the DOS prompt, try holding F8 when you first power on your computer. A boot menu should appear; pick your flash drive and press Enter, then proceed with the steps above.

Please install the following: Graphics driver Audio driver Ethernet driver (do a Repair install if prompted) Provide another MTADiag log after installing.

Just get the cheapest flash drive you can find. The DOS bootable drive is probably going to take less than 8MB of space on the USB flash drive.

Yes, you need a USB flash drive which you can format.

OK, all the drivers updated successfully. You're now running a beta nVidia graphics driver but that should be alright. Dutchman is correct in that your BIOS is several revisions old. Make a DOS-bootable USB flash drive following these instructions, then put this archive's contents and this archive's contents onto your flash drive. Boot from the flash drive and enter AFUDOS238 M3A78-EM~1.ROM into the prompt, then follow the instructions. Provide another screenshot of the Mainboard tab in CPU-Z after updating please.

Please install the following: Audio driver Ethernet driver (do a Repair install if prompted) Provide another MTADiag log after installing.

Please download and run MTADiag and follow the instructions. If MTADiag doesn't launch, please install Visual C++ 2012 runtimes (download and install vcredist_x86.exe) and try again. Press 'n' when asked. Post any Pastebin URL MTADiag gives you.

Please install the following: Graphics driver Audio driver Ethernet driver 1 Ethernet driver 2 Provide another MTADiag log after installing.

OK, forget about auto-uploading. After running MTADiag and receiving the error, don't close MTADiag but instead open an Explorer window, type %temp% in the address bar, then find an MTADiag-Log text file. Open it, upload it to pastebin.mtasa.com and post the link here, then close MTADiag. Sorry for the inconvenience. I still need to implement backup uploading to regular Pastebin.

Please install the following: Graphics driver 1 Graphics driver 2 Audio driver Wireless driver Provide another MTADiag log after installing.