Replace vehicle ide line in MTA. Is it possible?

Linux_Shines · June 30, 2012

Hello peoples, I'm coming with... problem(?) or simply, I call it an "wrinkle". My wrinkle is replace one line from vehicles.ide to MTA engine. I know, that a handling may be called like this:

function handling() 
for _,veh in pairs(getElementsByType("vehicle"))  
do 
    if getElementModel(veh) == 480  
    then 
        setVehicleHandling(veh, "mass", 1440.0) 
        setVehicleHandling(veh, "turnMass", 3513.6) 
        setVehicleHandling(veh, "dragCoeff", 0.77) 
        setVehicleHandling(veh, "centerOfMass", {0.0, 0.0, 0.004}) 
        setVehicleHandling(veh, "percentSubmerged", 75) 
        setVehicleHandling(veh, "tractionMultiplier", 0.74) 
        setVehicleHandling(veh, "tractionLoss", 0.787) 
        setVehicleHandling(veh, "tractionBias", 0.5) 
        setVehicleHandling(veh, "numberOfGears", 5) 
        setVehicleHandling(veh, "maxVelocity", 343.3) 
        setVehicleHandling(veh, "engineAcceleration", 22.27) 
        setVehicleHandling(veh, "engineInertia", 49.0) 
        setVehicleHandling(veh, "driveType", "rwd") 
        setVehicleHandling(veh, "engineType", "petrol") 
        setVehicleHandling(veh, "brakeDeceleration", 4.2) 
        setVehicleHandling(veh, "brakeBias", 0.57) 
        setVehicleHandling(veh, "ABS", false) 
        setVehicleHandling(veh, "steeringLock", 25.54) 
        setVehicleHandling(veh, "suspensionForceLevel", 0.6) 
        setVehicleHandling(veh, "suspensionDamping", 0.14) 
        setVehicleHandling(veh, "suspensionHighSpeedDamping", 3.3) 
        setVehicleHandling(veh, "suspensionUpperLimit", 0.05) 
        setVehicleHandling(veh, "suspensionLowerLimit", -0.08) 
        setVehicleHandling(veh, "suspensionFrontRearBias", 0.45) 
        setVehicleHandling(veh, "suspensionAntiDiveMultiplier", 0.4) 
        setVehicleHandling(veh, "seatOffsetDistance", 0.1) 
        setVehicleHandling(veh, "collisionDamageMultiplier", 0.69) 
        setVehicleHandling(veh, "monetary", 192500) 
        setVehicleHandling(veh, "modelFlags", 65A624) 
        setVehicleHandling(veh, "handlingFlags", 348803) 
        setVehicleHandling(veh, "headLight", 1) 
        setVehicleHandling(veh, "tailLight", 1) 
        setVehicleHandling(veh, "animGroup", 19) 
        end 
    end 
end 
addEventHandler("onPlayerVehicleEnter", getRootElement(), handling)

And it works good, but my question is - When I've an this line to replace:

480,    comet,      comet,      car,        COMET,      COMET,      null,   executive,  7,  0,  0,      -1, 0.735, 0.735,   1

is there any function to load this into MTA?

Jaysds1 · June 30, 2012

Sorry, but I didn't get what you meant on this line: "When I've an this line to replace:",

try this:

addEventHandler("onVehicleStartEnter",root,function() 
    if(getElementModel(source) == 480)then 
        setVehicleHandling(source, "mass", 1440.0) 
        setVehicleHandling(source, "turnMass", 3513.6) 
        setVehicleHandling(source, "dragCoeff", 0.77) 
        setVehicleHandling(source, "centerOfMass", {0.0, 0.0, 0.004}) 
        setVehicleHandling(source, "percentSubmerged", 75) 
        setVehicleHandling(source, "tractionMultiplier", 0.74) 
        setVehicleHandling(source, "tractionLoss", 0.787) 
        setVehicleHandling(source, "tractionBias", 0.5) 
        setVehicleHandling(source, "numberOfGears", 5) 
        setVehicleHandling(source, "maxVelocity", 343.3) 
        setVehicleHandling(source, "engineAcceleration", 22.27) 
        setVehicleHandling(source, "engineInertia", 49.0) 
        setVehicleHandling(source, "driveType", "rwd") 
        setVehicleHandling(source, "engineType", "petrol") 
        setVehicleHandling(source, "brakeDeceleration", 4.2) 
        setVehicleHandling(source, "brakeBias", 0.57) 
        setVehicleHandling(source, "ABS", false) 
        setVehicleHandling(source, "steeringLock", 25.54) 
        setVehicleHandling(source, "suspensionForceLevel", 0.6) 
        setVehicleHandling(source, "suspensionDamping", 0.14) 
        setVehicleHandling(source, "suspensionHighSpeedDamping", 3.3) 
        setVehicleHandling(source, "suspensionUpperLimit", 0.05) 
        setVehicleHandling(source, "suspensionLowerLimit", -0.08) 
        setVehicleHandling(source, "suspensionFrontRearBias", 0.45) 
        setVehicleHandling(source, "suspensionAntiDiveMultiplier", 0.4) 
        setVehicleHandling(source, "seatOffsetDistance", 0.1) 
        setVehicleHandling(source, "collisionDamageMultiplier", 0.69) 
        setVehicleHandling(source, "monetary", 192500) 
        setVehicleHandling(source, "modelFlags", 65A624) 
        setVehicleHandling(source, "handlingFlags", 348803) 
        setVehicleHandling(source, "headLight", 1) 
        setVehicleHandling(source, "tailLight", 1) 
        setVehicleHandling(source, "animGroup", 19) 
    end 
end)

Linux_Shines · July 1, 2012

All what I need, is put some code from vehicles.ide to MTA (exactly this code is placed below).

480,    comet,      comet,      car,        COMET,      COMET,      null,   executive,  7,  0,  0,      -1, 0.735, 0.735,   1

diegofkda · July 2, 2012

Unfortunately, this isn't possible in MTA as ide definitions aren't supported, who knows if it will support it in a future though.

Linux_Shines · July 4, 2012

I'll pray for this option. Thanks for quick reply. Thread may be closed.

Sign In

Replace vehicle ide line in MTA. Is it possible?

Question

Linux_Shines

Link to comment

4 answers to this question

Recommended Posts

Jaysds1

Link to comment

Linux_Shines

Link to comment

diegofkda

Link to comment

Linux_Shines

Link to comment

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Browse

Activity

MTA Network

Social Media