Can't open ports! Please help!

[Xwad]

I opened all ports for mta but when i type "openports" into the mta server.exe then it says that all ports all closed.

image of the opened ports:

http://i.imgur.com/eCzE8g2.png

[Egekan]

I'm having the same problem atm,

- Disable your Windows and tp-link(which is probably in the security section) firewalls.

- Set a static ip for you computer. Because everytime you connect, it gives you a random ip number.

If you don't know how to set a static ip: http://www.linksys.com/us/support-article?articleNum=140106

[Xwad]

I already disabled all firewalls. I have win 7. Is this video good for set the static ip?:

[Egekan]

Exactly. After you set your static ip don't forget to change the defined IP Adress(192.168.2.208) to the new ip adress(the IP adress chosen by you) which is in Port Forwarding page.

[Xwad]

does not work:/ still al ports are closed:( Maybe the problem is that im using an internet cable and not wifi?? Help!

[mohammed21999]

does not work:/ still al ports are closed:( Maybe the problem is that im using an internet cable and not wifi?? Help!

I used a cable and wifi both are working fine, I found a solution for you I hope that work for you

please read every mentioned word I typed here I know that you know what I wrote but read them again you may find a solution. firstly just take you PC ip from clicking open network and sharing center>your connection>Details> then type your IPV4 in your router IP address, and I see all another things you did in the picture was perfect, and if there's a Box for the name just type mta name on them, that would be great as I did and worked fine for me, in the first box I typed ( mta 1.5.00) , second one I typed ( mta 1.5.0 ), third I typed ( mta 1.5 ), but if there isn't any name boxes just never mind that step and continue, as this is the last steps, just save the menu and the restart your router, from your router tools you may find "reboot the Device" or something like that, then just after 60 second the router screen will open back then check if your PC IPV4 are still same on port forwarding in IP address Box or they are changed, if they are same just do open port, on your server black screen, but if they are changed ( but I did that step for a while before and they didn't changed at all). just retype your IPV4 again, and save changes then do openports. and it may work with you. I hope my replay helped you. If my replay doesn't help, let experts here help you