rllercstr7 Posted February 3, 2005 Share Posted February 3, 2005 I have had this unscanned server problem since .5 came out and recently figured out what is going wrong. For me it was cause by a router setting. For Linksys routers type the router IP (192.168.1.1) into internet explorer. Then after loging in look for a tab labeled DMZ Host. Then fill in the IP address that the router has assigned to the computer you want to use MTA on. If you don't know how to find this IP: in Windows XP open My Network Places then from the side bar select view network connections. Double click on the Local Area Connection and the internal IP is listed under the support tab. I hope this helps others with this problem get it working! Link to comment
eAi Posted February 3, 2005 Share Posted February 3, 2005 Putting yourself in the DMZ is not to be recommended. You make yourself 100% open to all the net nasties. You should just redirect the correct query port to your computer, (server port +123 I think). If you do have to put yourself in the DMZ for it to work, make sure you run an effective firewall. eAi Link to comment
:OutLaW: Posted February 3, 2005 Share Posted February 3, 2005 i have the same problem but i have a d-link router...can some1 plz give me a walk-thro on how to fix this problem? Link to comment
eAi Posted February 3, 2005 Share Posted February 3, 2005 http://www.portforward.com/ You need to forward port 2126 (by default, assuming the server is on port 2003). eAi Link to comment
rllercstr7 Posted February 3, 2005 Author Share Posted February 3, 2005 eAi forwarding that port did solve the problem. This might be a good thing to add to the manual. One thing I still notice is that 75% of the servers are now scanned with the proper server information, but the last 25% still are listed as unscanned. Is everyone elses like this? Is there a way to fix it? Thanks! Link to comment
orappa Posted February 3, 2005 Share Posted February 3, 2005 eAi forwarding that port did solve the problem. This might be a good thing to add to the manual. One thing I still notice is that 75% of the servers are now scanned with the proper server information, but the last 25% still are listed as unscanned. Is everyone elses like this? Is there a way to fix it? Thanks! I get that too. They're probably offline. Link to comment
eAi Posted February 3, 2005 Share Posted February 3, 2005 I'm pretty sure that is in the manual.... It should be pretty obvious really. It says "All Seeing Eye listing enabled. Port xxxx must be accessible from the internet." Link to comment
rllercstr7 Posted February 4, 2005 Author Share Posted February 4, 2005 sorry eAi it is there I just had to take a second look. Whoops Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now