[Help] Water not raise all over Map

BieHDC · July 11, 2013

Hello,

in past i have had a recource, which raises water all over map, but in my map this doesnt work.

See Screenshots: http://postimg.org/image/bwimlcl4z/

Here is my script:

-- server side 
    local maxLevel      =   35 -- max level 
    local untilW        =   120 -- sec 
      
    local raising,level     =   (maxLevel/untilW)/10,0 
    untilW = nil 
    local runningTimer 
      
      
    function editSomeWater() 
        level = level + raising -- level raising 
        setWaterLevel ( level, true, true ) -- set the level 
        if level >= maxLevel then -- compare values of level and max level 
            setWaterLevel ( maxLevel, true, true ) -- set it back to max level for perfection 
            if isTimer(runningTimer) then -- check if the timer exist 
                killTimer(runningTimer) -- stop the timer 
            end 
            runningTimer,level,maxLevel = nil,nil,nil -- delete data (ram) 
        end 
    end 
      
    setTimer (function () -- set a timer for 15000 millisec (15 sec), runs one time "1" 
        runningTimer = setTimer ( editSomeWater, 100, 0 ) -- set an invinity timer to set the water level, (0 = invinity) (only stops when you stop him with killTimer) 
    end,30000,1) 
     
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true )

denny199 · July 11, 2013

https://wiki.multitheftauto.com/wiki/CreateWater

BieHDC · July 11, 2013

Thx man^

denny199 · July 11, 2013

No problem

BieHDC · July 12, 2013

Doesnt work -.- and no errors in debugscript 3

--server side 
-- Setting water properties. 
height = 0 
SizeVal = 2998 
-- Defining variables. 
southWest_X = -SizeVal 
southWest_Y = -SizeVal 
southEast_X = SizeVal 
southEast_Y = -SizeVal 
northWest_X = -SizeVal 
northWest_Y = SizeVal 
northEast_X = SizeVal 
northEast_Y = SizeVal 
  
-- OnClientResourceStart function that creates the water. 
function thaResourceStarting( ) 
    water = createWater ( southWest_X, southWest_Y, height, southEast_X, southEast_Y, height, northWest_X, northWest_Y, height, northEast_X, northEast_Y, height ) 
    setWaterLevel ( height ) 
end 
addEventHandler("onClientResourceStart", resourceRoot, thaResourceStarting) 
  
local maxLevel      =   35 -- max level 
local untilW        =   120 -- sec 
      
local raising,level     =   (maxLevel/untilW)/10,0 
untilW = nil 
local runningTimer 
      
      
function editSomeWater() 
    level = level + raising -- level raising 
    setWaterLevel ( level, true, true ) -- set the level 
        if level >= maxLevel then -- compare values of level and max level 
        setWaterLevel ( maxLevel, true, true ) -- set it back to max level for perfection 
        if isTimer(runningTimer) then -- check if the timer exist 
            killTimer(runningTimer) -- stop the timer 
        end 
        runningTimer,level,maxLevel = nil,nil,nil -- delete data (ram) 
    end 
end 
      
setTimer (function () -- set a timer for 15000 millisec (15 sec), runs one time "1" 
    runningTimer = setTimer ( editSomeWater, 100, 0 ) -- set an invinity timer to set the water level, (0 = invinity) (only stops when you stop him with killTimer) 
end,30000,1) 
     
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true )

myonlake · July 12, 2013

You need to define the water element to the setWaterLevel. Try this.

--server side 
-- Setting water properties. 
height = 0 
SizeVal = 2998 
-- Defining variables. 
southWest_X = -SizeVal 
southWest_Y = -SizeVal 
southEast_X = SizeVal 
southEast_Y = -SizeVal 
northWest_X = -SizeVal 
northWest_Y = SizeVal 
northEast_X = SizeVal 
northEast_Y = SizeVal 
  
-- OnClientResourceStart function that creates the water. 
function thaResourceStarting( ) 
    setWaterLevel ( -500, false, false ) 
    water = createWater ( southWest_X, southWest_Y, height, southEast_X, southEast_Y, height, northWest_X, northWest_Y, height, northEast_X, northEast_Y, height ) 
    setWaterLevel ( water, height ) 
end 
addEventHandler("onClientResourceStart", resourceRoot, thaResourceStarting) 
  
local maxLevel      =   35 -- max level 
local untilW        =   120 -- sec 
      
local raising,level     =   (maxLevel/untilW)/10,0 
untilW = nil 
local runningTimer 
      
      
function editSomeWater() 
    level = level + raising -- level raising 
    setWaterLevel ( water, level ) -- set the level 
        if level >= maxLevel then -- compare values of level and max level 
        setWaterLevel ( water, maxLevel ) -- set it back to max level for perfection 
        if isTimer(runningTimer) then -- check if the timer exist 
            killTimer(runningTimer) -- stop the timer 
        end 
        runningTimer,level,maxLevel = nil,nil,nil -- delete data (ram) 
    end 
end 
      
setTimer (function () -- set a timer for 15000 millisec (15 sec), runs one time "1" 
    runningTimer = setTimer ( editSomeWater, 100, 0 ) -- set an invinity timer to set the water level, (0 = invinity) (only stops when you stop him with killTimer) 
end,30000,1) 
    
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true )

Edited July 12, 2013 by Guest

BieHDC · July 12, 2013

get this error:

WARNING: MAP\waterrise.lua:33: Bad argument @ 'setWaterLevel' [Expected number at argument 1, got nil]

setWaterLevel ( water, level, true, true ) -- set the level

Alen141 · July 12, 2013

get this error:
WARNING: MAP\waterrise.lua:33: Bad argument @ 'setWaterLevel' [Expected number at argument 1, got nil]

setWaterLevel ( water, level, true, true ) -- set the level

It works for me

--server side 
-- Setting water properties. 
height = 0 
SizeVal = 2998 
-- Defining variables. 
southWest_X = -SizeVal 
southWest_Y = -SizeVal 
southEast_X = SizeVal 
southEast_Y = -SizeVal 
northWest_X = -SizeVal 
northWest_Y = SizeVal 
northEast_X = SizeVal 
northEast_Y = SizeVal 
  
-- OnClientResourceStart function that creates the water. 
function thaResourceStarting( ) 
    setWaterLevel ( -500, false, false ) 
    water = createWater ( southWest_X, southWest_Y, height, southEast_X, southEast_Y, height, northWest_X, northWest_Y, height, northEast_X, northEast_Y, height ) 
    setWaterLevel ( water, height ) 
end 
addEventHandler("onClientResourceStart", resourceRoot, thaResourceStarting) 
  
local maxLevel      =   35 -- max level 
local untilW        =   120 -- sec 
      
local raising,level     =   (maxLevel/untilW)/10,0 
untilW = nil 
local runningTimer 
      
      
function editSomeWater() 
    level = level + raising -- level raising 
    setWaterLevel ( water, level ) -- set the level 
        if level >= maxLevel then -- compare values of level and max level 
        setWaterLevel ( water, maxLevel ) -- set it back to max level for perfection 
        if isTimer(runningTimer) then -- check if the timer exist 
            killTimer(runningTimer) -- stop the timer 
        end 
        runningTimer,level,maxLevel = nil,nil,nil -- delete data (ram) 
    end 
end 
      
setTimer (function () -- set a timer for 15000 millisec (15 sec), runs one time "1" 
    runningTimer = setTimer ( editSomeWater, 100, 0 ) -- set an invinity timer to set the water level, (0 = invinity) (only stops when you stop him with killTimer) 
end,30000,1) 
    
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true )

BieHDC · July 12, 2013

Ok will try

and the godmode script doesnt work

pls look again

BieHDC · July 12, 2013

I getting again the same mesage is i told

The water should start to raise after 30sec and then always getting a bit higher until reach maxLevel

This script worked without water creation, but it looked shitty see screenshots

Alen141 · July 12, 2013

I getting again the same mesage is i told
The water should start to raise after 30sec and then always getting a bit higher until reach maxLevel

This script worked without water creation, but it looked :~ see screenshots

you have to change type of script in meta file,add this after your file name type="client"

BieHDC · July 12, 2013

sure?

iMr.3a[Z]eF · July 12, 2013

Try then tell us.

BieHDC · July 12, 2013

Yes worked, but i change the eventhandler, because i want a good sync

tryed with 2 lan pcs and got not small difference

which eventhandler would you take?

BieHDC · July 12, 2013

maybe: onResourceStart

iMr.3a[Z]eF · July 12, 2013

what function you are changing it event?

BieHDC · July 12, 2013

Ok with onResourceStart worked but timer doesnt wait 30sec anymore

Here script again:

--server side 
-- Setting water properties. 
height = 0 
SizeVal = 2998 
-- Defining variables. 
southWest_X = -SizeVal 
southWest_Y = -SizeVal 
southEast_X = SizeVal 
southEast_Y = -SizeVal 
northWest_X = -SizeVal 
northWest_Y = SizeVal 
northEast_X = SizeVal 
northEast_Y = SizeVal 
  
-- OnClientResourceStart function that creates the water. 
function thaResourceStarting( ) 
    setWaterLevel ( -500, false, false ) 
    water = createWater ( southWest_X, southWest_Y, height, southEast_X, southEast_Y, height, northWest_X, northWest_Y, height, northEast_X, northEast_Y, height ) 
    setWaterLevel ( water, height ) 
end 
addEventHandler("onResourceStart", resourceRoot, thaResourceStarting) 
  
local maxLevel      =   35 -- max level 
local untilW        =   120 -- sec 
      
local raising,level     =   (maxLevel/untilW)/10,0 
untilW = nil 
local runningTimer 
      
      
function editSomeWater() 
    level = level + raising -- level raising 
    setWaterLevel ( water, level ) -- set the level 
        if level >= maxLevel then -- compare values of level and max level 
        setWaterLevel ( water, maxLevel ) -- set it back to max level for perfection 
        if isTimer(runningTimer) then -- check if the timer exist 
            killTimer(runningTimer) -- stop the timer 
        end 
        runningTimer,level,maxLevel = nil,nil,nil -- delete data (ram) 
    end 
end 
      
setTimer (function () -- set a timer for 15000 millisec (15 sec), runs one time "1" 
    runningTimer = setTimer ( editSomeWater, 100, 0 ) -- set an invinity timer to set the water level, (0 = invinity) (only stops when you stop him with killTimer) 
end,30000,1) 
    
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true )

iMr.3a[Z]eF · July 12, 2013

--server side 
-- Setting water properties. 
height = 0 
SizeVal = 2998 
-- Defining variables. 
southWest_X = -SizeVal 
southWest_Y = -SizeVal 
southEast_X = SizeVal 
southEast_Y = -SizeVal 
northWest_X = -SizeVal 
northWest_Y = SizeVal 
northEast_X = SizeVal 
northEast_Y = SizeVal 
  
-- OnClientResourceStart function that creates the water. 
function thaResourceStarting( ) 
    setWaterLevel ( -500, false, false ) 
    water = createWater ( southWest_X, southWest_Y, height, southEast_X, southEast_Y, height, northWest_X, northWest_Y, height, northEast_X, northEast_Y, height ) 
    setWaterLevel ( water, height ) 
end 
addEventHandler("onResourceStart", resourceRoot, thaResourceStarting) 
  
local maxLevel      =   35 -- max level 
local untilW        =   120 -- sec 
      
local raising,level     =   (maxLevel/untilW)/10,0 
untilW = nil 
local runningTimer 
      
      
function editSomeWater() 
    level = level + raising -- level raising 
    setWaterLevel ( water, level ) -- set the level 
        if level >= maxLevel then -- compare values of level and max level 
        setWaterLevel ( water, maxLevel ) -- set it back to max level for perfection 
        if isTimer(runningTimer) then -- check if the timer exist 
            killTimer(runningTimer) -- stop the timer 
        end 
        runningTimer,level,maxLevel = nil,nil,nil -- delete data (ram) 
    end 
end 
      
setTimer ( editSomeWater, 30000, 1 ) -- set an invinity timer to set the water level, (0 = invinity) (only stops when you stop him with killTimer) 
    
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true ) 
    outputChatBox ( "#FF0000Water starts to rise in 30sec! Be fast^^", getRootElement(), 255, 255, 255, true )

BieHDC · July 12, 2013

water dont start to raise

and debugscript 3 no output

itoko · July 12, 2013

untilW is doing nothing

BieHDC · July 12, 2013

and thats why not working?

itoko · July 12, 2013

yes, the level of water when it's raising is using untilW, but untilW never change, so the water level doesn't change.

BieHDC · July 12, 2013

and what to change?

iMr.3a[Z]eF · July 12, 2013

are you sure its ServerSide?

BieHDC · July 12, 2013

Yes

[Help] Water not raise all over Map

Recommended Posts

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members