Help with Gate, Castillo's Gang System

illestiraqi · March 6, 2013

This gate opens and closes with /openadm, and /closeadm, I want this all changed but keep the gates. I want the gates to open if user in "SWAT" gang is in it and to close but only opens and closes when user in "SWAT" gang is in it.

function createTheGate () 
  
         myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
  
  
      end 
  
      addEventHandler ( "onResourceStart", getResourceRootElement ( getThisResource () ), createTheGate ) 
  
  
  
  
  
 function openMyGate ( ) 
 moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
 end 
 addCommandHandler("openadm",openMyGate) 
  
  
 function movingMyGateBack () 
 moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
 end 
 addCommandHandler("closeadm",movingMyGateBack)

WASSIm. · March 6, 2013

try this:

local myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
  
function openMyGate ( ) 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
    end 
end 
addCommandHandler("openadm",openMyGate) 
  
function movingMyGateBack () 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
    end 
end 
addCommandHandler("closeadm",movingMyGateBack)

illestiraqi · March 6, 2013

try this:

local myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
  
function openMyGate ( ) 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
    end 
end 
addCommandHandler("openadm",openMyGate) 
  
function movingMyGateBack () 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
    end 
end 
addCommandHandler("closeadm",movingMyGateBack)

Remove the commands thing. I want the gates to trigger open/close when user in "SWAT" gang goes near it.

WASSIm. · March 6, 2013

local myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
local marker = createMarker( -713.90002441406, 973.20001220703, 14, "cylinder", 10, 255, 255, 255, 0) 
  
function openMyGate ( ) 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
    end 
end 
addEventHandler("onMarkerHit", marker, openMyGate) 
  
function movingMyGateBack () 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
    end 
end 
addEventHandler("onMarkerLeave", marker, movingMyGateBack)

illestiraqi · March 6, 2013

local myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
local marker = createMarker( -713.90002441406, 973.20001220703, 14, "cylinder", 10, 255, 255, 255, 0) 
  
function openMyGate ( ) 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
    end 
end 
addEventHandler("onMarkerHit", marker, openMyGate) 
  
function movingMyGateBack () 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
    end 
end 
addEventHandler("onMarkerLeave", marker, movingMyGateBack)

Why df is there this?

local marker = createMarker( -713.90002441406, 973.20001220703, 14, "cylinder", 10, 255, 255, 255, 0)

I think that just triggers the gate if user in "SWAT" team goes on the cylinder witch i dont want. I want the gates there, and user in "SWAT" group if they walk near them than it opens, no need for marker.

WASSIm. · March 6, 2013

you need this for auto open/close gate

createMarker 
or 
createColCircle

Castillo · March 6, 2013

local myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
local marker = createMarker( -713.90002441406, 973.20001220703, 14, "cylinder", 10, 255, 255, 255, 0) 
  
function openMyGate ( ) 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
    end 
end 
addEventHandler("onMarkerHit", marker, openMyGate) 
  
function movingMyGateBack () 
    if (getElementData(source, "gang") == "SWAT") then 
    moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
    end 
end 
addEventHandler("onMarkerLeave", marker, movingMyGateBack)

'source' in your script is the marker you just hit, not the player that hit it.

OGF · March 6, 2013

team getPlayerTeam ( player thePlayer )

you could try using this to make this less complicated.

Castillo · March 6, 2013

He's talking about my gang system, which is not team based, so that obviously wouldn't work.

OGF · March 6, 2013

Oh, I completely ignored the fact it was something else. forget what I said.

illestiraqi · March 6, 2013

So whats the code?

PaiN^ · March 6, 2013

local myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
local marker = createMarker( -713.90002441406, 973.20001220703, 14, "cylinder", 10, 255, 255, 255, 0) 
  
addEventHandler("onMarkerHit", marker,  
    function (hitElement)  
        if getElementType(hitElement) == "player" then 
            if (getElementData(source, "gang") == "SWAT") then 
                moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
            end 
        end 
    end 
) 
  
addEventHandler("onMarkerLeave", marker, 
    function (leftElement) 
        if getElementType(leftElement) == "player" then 
            if (getElementData(source, "gang") == "SWAT") then 
                moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
            end 
        end 
    end 
)

Castillo · March 6, 2013

local myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
local marker = createMarker( -713.90002441406, 973.20001220703, 14, "cylinder", 10, 255, 255, 255, 0) 
  
addEventHandler ( "onMarkerHit", marker, 
    function ( hitElement ) 
        if ( getElementType ( hitElement ) == "player" ) then 
            if ( getElementData ( hitElement, "gang") == "SWAT" ) then 
                moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
            end 
        end 
    end 
) 
  
addEventHandler ( "onMarkerLeave", marker, 
    function ( leftElement ) 
        if ( getElementType ( leftElement ) == "player" ) then 
            if ( getElementData ( leftElement, "gang" ) == "SWAT" ) then 
                moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
            end 
        end 
    end 
)

PaiN^ · March 6, 2013

local myGate1 = createObject ( 980, 1278.5, -1651.8000488281, 15.300000190735, 0, 0, 270 ) 
local marker = createMarker( -713.90002441406, 973.20001220703, 14, "cylinder", 10, 255, 255, 255, 0) 
  
addEventHandler ( "onMarkerHit", marker, 
    function ( hitElement ) 
        if ( getElementType ( hitElement ) == "player" ) then 
            if ( getElementData ( hitElement, "gang") == "SWAT" ) then 
                moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 9.8000001907349 ) 
            end 
        end 
    end 
) 
  
addEventHandler ( "onMarkerLeave", marker, 
    function ( leftElement ) 
        if ( getElementType ( leftElement ) == "player" ) then 
            if ( getElementData ( leftElement, "gang" ) == "SWAT" ) then 
                moveObject ( myGate1, 2500, 1278.5, -1651.8000488281, 15.300000190735 ) 
            end 
        end 
    end 
)

What have you changed in my code .?

EDIT: LooL saw it, Thanx

illestiraqi · March 7, 2013

Lol you guys didn't read my 2nd latest post, I want the cylinder thing removed, the gate should only trigger open when user in swat gang is near it, and close when is not near it. :L

Castillo · March 7, 2013

Use colshapes then.

illestiraqi · March 7, 2013

Use colshapes then.

Like I said, I don't know how to add stuff like that and that's why I posted this here to have help for my server.

Castillo · March 7, 2013

I think that you aren't getting the point of this section right, here we help you to fix your scripts, we don't make them for you, so, you should try to make the script, if it doesn't work, post it here and we help you.

illestiraqi · March 7, 2013

I think that you aren't getting the point of this section right, here we help you to fix your scripts, we don't make them for you, so, you should try to make the script, if it doesn't work, post it here and we help you.

The first script (Main Topic part) is basically my script, once I try the script will get fked up so theres no point of me trying, all I'm asking for the cylinder removed because I just want it to open if user in SWAT gang goes near it and to close.

OGF · March 7, 2013

The first script (Main Topic part) is basically my script, once I try the script will get fked up so theres no point of me trying, all I'm asking for the cylinder removed because I just want it to open if user in SWAT gang goes near it and to close.

Then replace the marker line with

colshape createColCircle ( float fX, float fY, float radius )

Or

colshape createColRectangle ( float fX, float fY, float fWidth, float fHeight)

Then with events

onColShapeHit

onColShapeLeave

You can also check the shapes using

https://wiki.multitheftauto.com/wiki/SetDevelopmentMode

Like snake said this area is to get help not get people to do them for you. If you want them done some people are offering to do it for cash.

illestiraqi · March 8, 2013

The first script (Main Topic part) is basically my script, once I try the script will get fked up so theres no point of me trying, all I'm asking for the cylinder removed because I just want it to open if user in SWAT gang goes near it and to close.

Then replace the marker line with
colshape createColCircle ( float fX, float fY, float radius ) 
Or
colshape createColRectangle ( float fX, float fY, float fWidth, float fHeight) 
Then with events
onColShapeHit 
onColShapeLeave 
You can also check the shapes using

https://wiki.multitheftauto.com/wiki/SetDevelopmentMode

Like snake said this area is to get help not get people to do them for you. If you want them done some people are offering to do it for cash.

Can the script be made because I just wanted my gate changed by having commands removed and open by users in castillo's gang system in SWAT gang

Sign In

Help with Gate, Castillo's Gang System

Recommended Posts

illestiraqi

WASSIm.

illestiraqi

WASSIm.

illestiraqi

WASSIm.

Castillo

OGF

Castillo

OGF

illestiraqi

PaiN^

Castillo

PaiN^

illestiraqi

Castillo

illestiraqi

Castillo

illestiraqi

OGF

illestiraqi

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Browse

Activity

MTA Network

Social Media