Server start

[qaisjp]

I have gone through the documentation and read the server manual and did what it said (on a private home computer) but my test server will not appear in Public tab and only the LAN tab, I am aware I have to open ports... this is what I found:

NAT -- Port Triggering Setup

Some applications require that specific ports in the Router's firewall be opened for access by the remote parties. Port Trigger dynamically opens up the 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the 'Triggering Ports'. The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the 'Open Ports'. A maximum 32 entries can be configured.

This is what i put in:

Application Trigger Open

Name Protocol Port Range Protocol Port Range

Start End Start End

mtasa UDP 22004 22004 UDP 22004 >22004

mtasa TCP 22005 22005 TCP 22005>22005

mtasa UDP 22127 22127 UDP 22127>22127

Help

[dzek (varez)]

you have to specify to which local ip you want to forward your ports. what you had enter there?

find your local ip by pressing windows key + R, then typing "cmd", then "ipconfig /all" - find your network card in the output, and there will be your ip assigned.

oh, and remember that servers are visible on server list after running the server for 24h, (sometimes, manually adding it to game-monitor.com will make things faster).

and i hope you have 22004 port set in mtaserver.conf file

[qaisjp]

Yeah I set 22004, I am the only one who use the internet in the house so no doubt it is 192.168.1.2 ( i think )

It asks me for Trigger Port (start/end) and Open Port (start/end) (port range)

Do I put the ones

UDP 22004 >22004

TCP 22005>22005

UDP 22127>22127 ( the arrow seperating start/end)

and the Trigger Ports as my local IP

So the trigger part would be:

192.168.1.2 (UDP)

192.168.1.2 (TCP)

192.168.1.2 (UDP)

I will upload a picture soon

Here is a pic:

That was what I wrote initially.

Any idea where I put the local IP and what are the range values?

When you said it has to be online for 24 hours, do you mean consecutively, or a total?

I have a dynamic IP and I turn my router off nightly... will it still work?

Thnks in advance

[dzek (varez)]

ranges are fine.

consecutively 24h online. or manually.

there is only like 50% chance it's 192.168.1.2, some routers have default starting range set to *.*.*.10 (idk why), some could have another.

idk where to put your local ip.

tell me your router model

[qaisjp]

My local IP is 192.168.1.2 (I checked it)

Router Manufactarer: MTNL Model:DNA-A213

I have a dynamic ip, so it changes everyday D:

[dzek (varez)]

dynamic ip isnt a problem (but you will have to manually add it to game-monitor.com)

MTNL DNA-A213 - omg, what is this? can't find any tutorials for this..

[qaisjp]

dynamic ip isnt a problem (but you will have to manually add it to game-monitor.com)

MTNL DNA-A213 - omg, what is this? can't find any tutorials for this..

How can I add it to game-monitor.com if my IP changes everyday? The next day I will have to re-register my server lol

I was going to say that MTNL DNA-A213 is not even on port forwarding website...

Will it still be accessible by the public (Trigger Ports = my public ip) if I give my IP (not my local on )

I hope so :3

http://www.ip-adress.com/

Find out your own IP in a matter of seconds lol

[Zango]

being publicly available is only a matter of opened ports and disabled firewalls, but in order to have it on the internet list you need to have a stationary IP, unless you're going to manually add it everyday

[dzek (varez)]

game-monitor should allow to add servers via domain.

then you can register free domain that updates your ip everytime it changes, then gamemonitor see that server have new ip and just change it in its database..

or maybe they support it already (but from what i can remember - they are not)