[help]move object

[ST3REO]

could someone create me the code to move this object?

id object : 3115 name object: CARRIER_LIFT1_SFSE

down ->4060.9077148438 -1819.9403076172 29.235511779785

up->4060.9077148438 -1819.9403076172 346.60443115234

please

I have already read a lot but I don't succeed there.if someone could create me the code please

this object must stir only under and above, it is for a map race.

[loler]

Ah i maked a tuturoial :

for moving objects:

1. when making a map, decide what objects you want to be moving

2. move object to desired location (like, if you want an elevator, move it to destination where it should go) and write down its id and position (x-y-z).

3. move your object back where it should start

repeat steps 2-3 for all the objects you want to be dynamic

5. save your map when you finished

6. open .map file if you're using 1.0 mapeditor (or convert it if you're using race mapeditor and then open)

7. find your objects' entries (by id you wrote down for example), it should be like this:

Code:

<object id="testobject" model="3115" interior="0" dimension="0" posX="3446.6684570313" posY="-1914.6517333984" posZ="1.2000885009766" rotX="0" rotY="0" rotZ="0" />

8. now add your desired parameters:

isMoving="true" - to enable moving

movTime="5000" - time to move object form one location to another, in msec (5 sec set here)

restTime="1000" - time the object will stay at each location (1 sec set here)

9. and finally add the x-y-z location of end point you wrote down:

movX="3446.6684570313"

movY="-1914.6517333984"

movZ="13.75008392334"

and it should look like this:

Code:

<object id="testobject" model="3115" interior="0" dimension="0" posX="3446.6684570313" posY="-1914.6517333984" posZ="1.2000885009766" rotX="0" rotY="0" rotZ="0" isMoving="true" movTime="5000" restTime="1000" movX="3446.6684570313" movY="-1914.6517333984" movZ="13.75008392334" />

and you're done.

[dzek (varez)]

@loler, i never heard that mta support it natively

i dont know where you find it, but you have to script it

[loler]

lol i maked it and i dont found it , i was mapper

and I didnt know how to script that

[kevin11]

k commands are up and down

5000 in line 3/7 stands for the speed (for slower go higher(5000+) and fast go lower (5000-))

3115 in 1 line stands for the object

u can change commands by editing this

addCommandHandler("up", opendoor)
addCommandHandler("down", opendoor)

gate = createObject(3115,213.37258911133,1875.5131835938,7.0294618606567,90,0,0)
 
function opendoor()
moveObject (gate, 5000, 4060.9077148438,-1819.9403076172,29.235511779785 )
end
addCommandHandler("up", opendoor)
function closedoor()
moveObject (gate, 5000, 4060.9077148438,-1819.9403076172,346.60443115234 )
end
addCommandHandler("down", closedoor)

yes people : ) im learning

[dzek (varez)]

loler, as you are new here - small advice. If you dont have anything useful to say-dont say anything.

kevin, this is the script for opening closing gates,moving objects on command. Not automatically. And its not even by you ;p

[ST3REO]

could someone create me the code to move this object?

id object : 3115 name object: CARRIER_LIFT1_SFSE

down ->4060.9077148438 -1819.9403076172 29.235511779785

up->4060.9077148438 -1819.9403076172 346.60443115234

please

I have already read a lot but I don't succeed there.if someone could create me the code please

this object must stir only under and above, it is for a map race.

you could create me the code to directly insert in.map? please

I use mta he knows are 1.0.3 a problem?

[ST3REO]

Ah i maked a tuturoial :

for moving objects:

1. when making a map, decide what objects you want to be moving

2. move object to desired location (like, if you want an elevator, move it to destination where it should go) and write down its id and position (x-y-z).

3. move your object back where it should start

repeat steps 2-3 for all the objects you want to be dynamic

5. save your map when you finished

6. open .map file if you're using 1.0 mapeditor (or convert it if you're using race mapeditor and then open)

7. find your objects' entries (by id you wrote down for example), it should be like this:

Code:

<object id="testobject" model="3115" interior="0" dimension="0" posX="3446.6684570313" posY="-1914.6517333984" posZ="1.2000885009766" rotX="0" rotY="0" rotZ="0" />

8. now add your desired parameters:

isMoving="true" - to enable moving

movTime="5000" - time to move object form one location to another, in msec (5 sec set here)

restTime="1000" - time the object will stay at each location (1 sec set here)

9. and finally add the x-y-z location of end point you wrote down:

movX="3446.6684570313"

movY="-1914.6517333984"

movZ="13.75008392334"

and it should look like this:

Code:

<object id="testobject" model="3115" interior="0" dimension="0" posX="3446.6684570313" posY="-1914.6517333984" posZ="1.2000885009766" rotX="0" rotY="0" rotZ="0" isMoving="true" movTime="5000" restTime="1000" movX="3446.6684570313" movY="-1914.6517333984" movZ="13.75008392334" />

and you're done.

I have already tried a lot of times so but it doesn't work

HELPPPPPP

[dzek (varez)]

cause you need a script for it too..

[ST3REO]

the object must get up and to lower only without any command.it is for a map race

do you have a map with objects that stir so that to see the script?

any map race that has an object that stirs.. please.

[dzek (varez)]

ill try to prepare it today for you. i have one, but a bit broken. after fix, i will publish to community, and share link here

[ST3REO]

ok thanks.if it is a problem to post here you can send me an email with the map.

me if I see the script on a map I immediately understand ([email protected]) tnx4support

[ST3REO]

does nobody have a map / resonce with an object that stirs on and down?

I pray you

[loler]

Yep , I have a map with objects that moves but i didnt release it ( its race map)

[dzek (varez)]

sorry,i forgot about you.. im preparing it right now

[dzek (varez)]

https://community.multitheftauto.com/index.html?p ... ils&id=809

[ST3REO]

thanks friend, is now me everything clear.

[ST3REO]

look my job with you script

https://www.youtube.com/watch?v=-gLut7oewmo

[dzek (varez)]

why there are 2 platforms? it should work this way? smashing cars?

[ST3REO]

a base serves for the cars and that that it stirs must destroy

with this script I have understood a lot.thanks infinitely varez.