Quited

Can you in 2.7 Ver Make auto drivers update example : chipset , MEI , Strongar And auto Screenshot gta:sa Folder and Send to Pastbin ? auto Screenshot maybe possible

possible mtadiag with mta sa ? I know its separate program from MTA

Can i load ped.ifp use script if possible plz give me script sorry bad english

Mtaserver.conf after modify -- This parameter specifies the name the server will be visible as in the ingame server browser and on Game-Monitor. It is a required parameter. --> Default MTA Server -- ONLY USE THIS PARAMETER IF YOU ARE SURE OF WHAT YOU ARE DOING - it is generally only needed for professional servers and should be left blank otherwise. This parameter specifies the IP to use for servers that have multiple IP addresses. If left blank, it will default to server's standard local IP address. --> 192.168.1.79 22003 32 1 22005 1 5 20 11 1 [url=https://wiki.multitheftauto.com/wiki/GetPlayerVersion]https://wiki.multitheftauto.com/wiki/GetPlayerVersion[/url] and look like this: 1.1.0-9.03100.0 Note that this setting only determines if the client should be prompted to update. The actual build number they receive will be the highest available. See: [url=https://nightly.multitheftauto.com/ver]https://nightly.multitheftauto.com/ver[/url] --> [url=https://nightly.multitheftauto.com/ver]https://nightly.multitheftauto.com/ver[/url] --> 1 0 -- This parameter reduces the server's bandwidth usage by using various optimizations. Values: none, medium or maximum ; default value: medium --> medium -- The following ???_sync_interval parameters determine the time in milliseconds between certain network packets being sent. More information on how each settings works is available here: https://wiki.multitheftauto.com/wiki/Server_mtaserver.conf --> -- Player sync interval. Default: 100 --> 100 -- Lightweight (player) sync interval. Used when players are far apart. Default: 1500 --> 1500 -- Camera sync interval. Default: 500 --> 500 -- Ped sync interval. Default: 400 --> 500 -- Unoccupied_vehicle sync interval. Default: 400 --> 1000 -- Keysync mouse rotation sync interval. For limiting key sync packets due to mouse movement. Default: 100 --> 100 -- Keysync analog movement sync interval. For limiting key sync packets due to joystick movement. Default: 100 --> 100 -- This parameter can improve the reliability of shots when using certain weapons. However, it uses more bandwidth. Values: 0 - disabled , 1 - enabled ; default value: 0. --> 0 -- This parameter sets the amount of extrapolation that clients will apply to remote vehicles. This can reduce some of the latency induced location disparency by predicting where the remote vehicles will probably be. Depending on the gamemode, an incorrect prediction may have a negative effect. Therefore this setting should be considered experimental. Available range: 0 to 100. Default - 0 --> 0 -- This parameter places a limit on how much time (in milliseconds) the vehicle extrapolation will attempt to compensate for. Only relevant if is greater than zero. Available range: 50 to 500. Default - 150 --> 150 -- This parameter specifies whether or not to run the network synchronization on another thread. Enabling will make the sync smoother, but may increase cpu usage slightly. Values: 0 - Off, 1 - On. Default: 1 --> 1 -- Specifies the location and file name of this servers unique private key. This is used to prevent private files saved on the client from being read by other servers. More infomation about client private files can be found here: [url=https://wiki.multitheftauto.com/wiki/Filepath]https://wiki.multitheftauto.com/wiki/Filepath[/url] Keep a backup of this file in a safe place. Default value: server-id.keys--> server-id.keys -- Specifies the location and name of the main server log file. If left blank, server won't be saving this file. --> logs/server.log -- As well as the main log file, login successes and failures are logged here for easy reviewing of security issues. If left blank, this file is not used --> logs/server_auth.log -- Specifies the location and name of the file used to log database queries. The server command 'debugdb' sets the amount of logging. --> logs/db.log -- This parameter specifies the location and name of the Access Control List settings file. If left blank, server will use acl.xml file, located in the same folder as this configuration file. --> acl.xml -- Specifies the location and name of the debugscript log file. If left blank, server won't be saving this file. --> logs/scripts.log -- Specifies the level of the debugscript log file. Available values: 0, 1, 2, 3. When not set, defaults to 0. --> 0 -- Specifies the level of the html debug. Available values: 0, 1, 2, 3. When not set, defaults to 0. --> 0 -- Specifies the frame rate limit that will be applied to connecting clients. Available range: 25 to 100. Default: 36. --> 36 -- Specifies whether or not players should automatically be logged in based on their IP adresses --> 0 -- This parameter specifies whether or not to enable player voice chat in-game Values: 0 - disabled , 1 - enabled --> 0 -- This parameter specifies the sample rate for voice chat. 'voice' parameter must be set to 1 for this to be effective. Higher settings use more bandwidth and increase the sampling quality of voice chat Values: 0 - Narrowband (8kHz), 1 - Wideband (16kHz), 2 - Ultrawideband (32kHz). Default - 1 --> 1 -- This parameter specifies the voice quality for voice chat. 'voice' parameter must be set to 1 for this to be effective. Higher settings use more bandwidth and increase the the overall quality of voice chat Available range: 0 to 10. Default - 4 --> 4 -- Specifies the voice bitrate, in bps. This optional parameter overrides the previous two settings. If not set, MTA handles this automatically. Use with care. --> -- 24600 --> -- This parameter specifies the path to use for a basic backup of some server files. Note that basic backups are only made during server startup. Default value: backups --> backups -- This parameter specifies the number of days between each basic backup. Backups are only made during server startup, so the actual interval maybe much longer. Setting backup_interval to 0 will disable backups Available range: 0 to 30. Default - 3 --> 3 -- This parameter specifies the maximum number of backup copies to keep. Setting backup_copies to 0 will disable backups Available range: 0 to 100. Default - 5 --> 5 -- Specifies the module(s) which are loaded with the server. To load several modules, add more parameter(s). Optional parameter. --> -- --> -- --> -- Specifies resources that are loaded when the server starts and/or which are protected from being stopped. To specify several resources, add more parameter(s). --> "admin" startup="1" protected="0"/> "defaultstats" startup="1" protected="0"/> "helpmanager" startup="1" protected="0"/> "joinquit" startup="1" protected="0"/> "mapcycler" startup="1" protected="0"/> "mapmanager" startup="1" protected="0"/> "parachute" startup="1" protected="0"/> "resourcebrowser" startup="1" protected="1" default="true"/> "resourcemanager" startup="1" protected="1"/> "scoreboard" startup="1" protected="0"/> "spawnmanager" startup="1" protected="0"/> "voice" startup="1" protected="0" /> "votemanager" startup="1" protected="0"/> "webadmin" startup="1" protected="0"/> -- play is the default freeroam gamemode. Remove the following line to prevent it from starting. --> "play" startup="1" protected="0"/>

If i join my server dont use custome i type f8 : allow client files : 23

-- This parameter specifies the name the server will be visible as in the ingame server browser and on Game-Monitor. It is a required parameter. --> Default MTA Server -- ONLY USE THIS PARAMETER IF YOU ARE SURE OF WHAT YOU ARE DOING - it is generally only needed for professional servers and should be left blank otherwise. This parameter specifies the IP to use for servers that have multiple IP addresses. If left blank, it will default to server's standard local IP address. --> 192.168.1.79 22003 32 1 22005 1 5 20 11 1 [url=https://wiki.multitheftauto.com/wiki/GetPlayerVersion]https://wiki.multitheftauto.com/wiki/GetPlayerVersion[/url] and look like this: 1.1.0-9.03100.0 Note that this setting only determines if the client should be prompted to update. The actual build number they receive will be the highest available. See: [url=https://nightly.multitheftauto.com/ver]https://nightly.multitheftauto.com/ver[/url] --> [url=https://nightly.multitheftauto.com/ver]https://nightly.multitheftauto.com/ver[/url] --> 1 0 -- This parameter reduces the server's bandwidth usage by using various optimizations. Values: none, medium or maximum ; default value: medium --> medium -- The following ???_sync_interval parameters determine the time in milliseconds between certain network packets being sent. More information on how each settings works is available here: https://wiki.multitheftauto.com/wiki/Server_mtaserver.conf --> -- Player sync interval. Default: 100 --> 100 -- Lightweight (player) sync interval. Used when players are far apart. Default: 1500 --> 1500 -- Camera sync interval. Default: 500 --> 500 -- Ped sync interval. Default: 400 --> 500 -- Unoccupied_vehicle sync interval. Default: 400 --> 1000 -- Keysync mouse rotation sync interval. For limiting key sync packets due to mouse movement. Default: 100 --> 100 -- Keysync analog movement sync interval. For limiting key sync packets due to joystick movement. Default: 100 --> 100 -- This parameter can improve the reliability of shots when using certain weapons. However, it uses more bandwidth. Values: 0 - disabled , 1 - enabled ; default value: 0. --> 0 -- This parameter sets the amount of extrapolation that clients will apply to remote vehicles. This can reduce some of the latency induced location disparency by predicting where the remote vehicles will probably be. Depending on the gamemode, an incorrect prediction may have a negative effect. Therefore this setting should be considered experimental. Available range: 0 to 100. Default - 0 --> 0 -- This parameter places a limit on how much time (in milliseconds) the vehicle extrapolation will attempt to compensate for. Only relevant if is greater than zero. Available range: 50 to 500. Default - 150 --> 150 -- This parameter specifies whether or not to run the network synchronization on another thread. Enabling will make the sync smoother, but may increase cpu usage slightly. Values: 0 - Off, 1 - On. Default: 1 --> 1 -- Specifies the location and file name of this servers unique private key. This is used to prevent private files saved on the client from being read by other servers. More infomation about client private files can be found here: [url=https://wiki.multitheftauto.com/wiki/Filepath]https://wiki.multitheftauto.com/wiki/Filepath[/url] Keep a backup of this file in a safe place. Default value: server-id.keys--> server-id.keys -- Specifies the location and name of the main server log file. If left blank, server won't be saving this file. --> logs/server.log -- As well as the main log file, login successes and failures are logged here for easy reviewing of security issues. If left blank, this file is not used --> logs/server_auth.log -- Specifies the location and name of the file used to log database queries. The server command 'debugdb' sets the amount of logging. --> logs/db.log -- This parameter specifies the location and name of the Access Control List settings file. If left blank, server will use acl.xml file, located in the same folder as this configuration file. --> acl.xml -- Specifies the location and name of the debugscript log file. If left blank, server won't be saving this file. --> logs/scripts.log -- Specifies the level of the debugscript log file. Available values: 0, 1, 2, 3. When not set, defaults to 0. --> 0 -- Specifies the level of the html debug. Available values: 0, 1, 2, 3. When not set, defaults to 0. --> 0 -- Specifies the frame rate limit that will be applied to connecting clients. Available range: 25 to 100. Default: 36. --> 36 -- Specifies whether or not players should automatically be logged in based on their IP adresses --> 0 -- This parameter specifies whether or not to enable player voice chat in-game Values: 0 - disabled , 1 - enabled --> 0 -- This parameter specifies the sample rate for voice chat. 'voice' parameter must be set to 1 for this to be effective. Higher settings use more bandwidth and increase the sampling quality of voice chat Values: 0 - Narrowband (8kHz), 1 - Wideband (16kHz), 2 - Ultrawideband (32kHz). Default - 1 --> 1 -- This parameter specifies the voice quality for voice chat. 'voice' parameter must be set to 1 for this to be effective. Higher settings use more bandwidth and increase the the overall quality of voice chat Available range: 0 to 10. Default - 4 --> 4 -- Specifies the voice bitrate, in bps. This optional parameter overrides the previous two settings. If not set, MTA handles this automatically. Use with care. --> -- 24600 --> -- This parameter specifies the path to use for a basic backup of some server files. Note that basic backups are only made during server startup. Default value: backups --> backups -- This parameter specifies the number of days between each basic backup. Backups are only made during server startup, so the actual interval maybe much longer. Setting backup_interval to 0 will disable backups Available range: 0 to 30. Default - 3 --> 3 -- This parameter specifies the maximum number of backup copies to keep. Setting backup_copies to 0 will disable backups Available range: 0 to 100. Default - 5 --> 5 -- Specifies the module(s) which are loaded with the server. To load several modules, add more parameter(s). Optional parameter. --> -- --> -- --> -- Specifies resources that are loaded when the server starts and/or which are protected from being stopped. To specify several resources, add more parameter(s). --> "admin" startup="1" protected="0"/> "defaultstats" startup="1" protected="0"/> "helpmanager" startup="1" protected="0"/> "joinquit" startup="1" protected="0"/> "mapcycler" startup="1" protected="0"/> "mapmanager" startup="1" protected="0"/> "parachute" startup="1" protected="0"/> "resourcebrowser" startup="1" protected="1" default="true"/> "resourcemanager" startup="1" protected="1"/> "scoreboard" startup="1" protected="0"/> "spawnmanager" startup="1" protected="0"/> "voice" startup="1" protected="0" /> "votemanager" startup="1" protected="0"/> "webadmin" startup="1" protected="0"/> -- play is the default freeroam gamemode. Remove the following line to prevent it from starting. --> "play" startup="1" protected="0"/>

-- This parameter specifies the name the server will be visible as in the ingame server browser and on Game-Monitor. It is a required parameter. --> Default MTA Server -- ONLY USE THIS PARAMETER IF YOU ARE SURE OF WHAT YOU ARE DOING - it is generally only needed for professional servers and should be left blank otherwise. This parameter specifies the IP to use for servers that have multiple IP addresses. If left blank, it will default to server's standard local IP address. --> 192.168.1.79 22003 32 1 22005 1 5 20 11 1 [url=https://wiki.multitheftauto.com/wiki/GetPlayerVersion]https://wiki.multitheftauto.com/wiki/GetPlayerVersion[/url] and look like this: 1.1.0-9.03100.0 Note that this setting only determines if the client should be prompted to update. The actual build number they receive will be the highest available. See: [url=https://nightly.multitheftauto.com/ver]https://nightly.multitheftauto.com/ver[/url] --> [url=https://nightly.multitheftauto.com/ver]https://nightly.multitheftauto.com/ver[/url] --> 1 0 -- This parameter reduces the server's bandwidth usage by using various optimizations. Values: none, medium or maximum ; default value: medium --> medium -- The following ???_sync_interval parameters determine the time in milliseconds between certain network packets being sent. More information on how each settings works is available here: https://wiki.multitheftauto.com/wiki/Server_mtaserver.conf --> -- Player sync interval. Default: 100 --> 100 -- Lightweight (player) sync interval. Used when players are far apart. Default: 1500 --> 1500 -- Camera sync interval. Default: 500 --> 500 -- Ped sync interval. Default: 400 --> 500 -- Unoccupied_vehicle sync interval. Default: 400 --> 1000 -- Keysync mouse rotation sync interval. For limiting key sync packets due to mouse movement. Default: 100 --> 100 -- Keysync analog movement sync interval. For limiting key sync packets due to joystick movement. Default: 100 --> 100 -- This parameter can improve the reliability of shots when using certain weapons. However, it uses more bandwidth. Values: 0 - disabled , 1 - enabled ; default value: 0. --> 0 -- This parameter sets the amount of extrapolation that clients will apply to remote vehicles. This can reduce some of the latency induced location disparency by predicting where the remote vehicles will probably be. Depending on the gamemode, an incorrect prediction may have a negative effect. Therefore this setting should be considered experimental. Available range: 0 to 100. Default - 0 --> 0 -- This parameter places a limit on how much time (in milliseconds) the vehicle extrapolation will attempt to compensate for. Only relevant if is greater than zero. Available range: 50 to 500. Default - 150 --> 150 -- This parameter specifies whether or not to run the network synchronization on another thread. Enabling will make the sync smoother, but may increase cpu usage slightly. Values: 0 - Off, 1 - On. Default: 1 --> 1 -- Specifies the location and file name of this servers unique private key. This is used to prevent private files saved on the client from being read by other servers. More infomation about client private files can be found here: [url=https://wiki.multitheftauto.com/wiki/Filepath]https://wiki.multitheftauto.com/wiki/Filepath[/url] Keep a backup of this file in a safe place. Default value: server-id.keys--> server-id.keys -- Specifies the location and name of the main server log file. If left blank, server won't be saving this file. --> logs/server.log -- As well as the main log file, login successes and failures are logged here for easy reviewing of security issues. If left blank, this file is not used --> logs/server_auth.log -- Specifies the location and name of the file used to log database queries. The server command 'debugdb' sets the amount of logging. --> logs/db.log -- This parameter specifies the location and name of the Access Control List settings file. If left blank, server will use acl.xml file, located in the same folder as this configuration file. --> acl.xml -- Specifies the location and name of the debugscript log file. If left blank, server won't be saving this file. --> logs/scripts.log -- Specifies the level of the debugscript log file. Available values: 0, 1, 2, 3. When not set, defaults to 0. --> 0 -- Specifies the level of the html debug. Available values: 0, 1, 2, 3. When not set, defaults to 0. --> 0 -- Specifies the frame rate limit that will be applied to connecting clients. Available range: 25 to 100. Default: 36. --> 36 -- Specifies whether or not players should automatically be logged in based on their IP adresses --> 0 -- This parameter specifies whether or not to enable player voice chat in-game Values: 0 - disabled , 1 - enabled --> 0 -- This parameter specifies the sample rate for voice chat. 'voice' parameter must be set to 1 for this to be effective. Higher settings use more bandwidth and increase the sampling quality of voice chat Values: 0 - Narrowband (8kHz), 1 - Wideband (16kHz), 2 - Ultrawideband (32kHz). Default - 1 --> 1 -- This parameter specifies the voice quality for voice chat. 'voice' parameter must be set to 1 for this to be effective. Higher settings use more bandwidth and increase the the overall quality of voice chat Available range: 0 to 10. Default - 4 --> 4 -- Specifies the voice bitrate, in bps. This optional parameter overrides the previous two settings. If not set, MTA handles this automatically. Use with care. --> -- 24600 --> -- This parameter specifies the path to use for a basic backup of some server files. Note that basic backups are only made during server startup. Default value: backups --> backups -- This parameter specifies the number of days between each basic backup. Backups are only made during server startup, so the actual interval maybe much longer. Setting backup_interval to 0 will disable backups Available range: 0 to 30. Default - 3 --> 3 -- This parameter specifies the maximum number of backup copies to keep. Setting backup_copies to 0 will disable backups Available range: 0 to 100. Default - 5 --> 5 -- Specifies the module(s) which are loaded with the server. To load several modules, add more parameter(s). Optional parameter. --> -- --> -- --> -- Specifies resources that are loaded when the server starts and/or which are protected from being stopped. To specify several resources, add more parameter(s). --> "admin" startup="1" protected="0"/> "defaultstats" startup="1" protected="0"/> "helpmanager" startup="1" protected="0"/> "joinquit" startup="1" protected="0"/> "mapcycler" startup="1" protected="0"/> "mapmanager" startup="1" protected="0"/> "parachute" startup="1" protected="0"/> "resourcebrowser" startup="1" protected="1" default="true"/> "resourcemanager" startup="1" protected="1"/> "scoreboard" startup="1" protected="0"/> "spawnmanager" startup="1" protected="0"/> "voice" startup="1" protected="0" /> "votemanager" startup="1" protected="0"/> "webadmin" startup="1" protected="0"/> -- play is the default freeroam gamemode. Remove the following line to prevent it from starting. --> "play" startup="1" protected="0"/>

how load ped.ifp i have cusome and i am check box "use custom gta:sa files" and in my mtaserver.conf but dont work this blocking solve ?

yes "anim/ped.ifp" verify="23" /> can i add verify 23 ?

i see option custom after update i have ped.ifp but if i join my server or any server kicked me say , blocking custom how to fix that in my server -- --> By default, the server will block the use of customized GTA:SA data files. To allow specific client files, add one or more of the above lines. More information: Anti-cheat guide disableac

السلام عليكم ورحمه الله وبركاته (ازالة اللاق كامل من اللعبة والاون لاين (مهم للكل الشرح : http://www.gta-arabs.com/gt/showthread.php?t=49671 معليش ماقدر انسخ الموضوع هنا مايقبل وحطيت لكم المصدر والموضوع حقي

Big thx But can you add mta diag with mtasa.com download And shortcut in desktop

uploaded incomplete < check your hosting server to fix the bug

Maybe you not give mta sa All permisstion (Not server - mta sa) And Downlaod admin resource agein

ارسله هنا برايفت PM اسم المستخدم حقه 3NAD وان شأء ألله يرد عليك

maybe you give guest admin and he destroy admin group download mta agein and copy acl.xml to hosting server and replace dont forget add resource.admin in admin group and all groups

كلم عناد برايفت حنا مانقدر نساعدك في هذا الموضوع

Can Someone Help Me ?

Bindkey

Download mta agien Unstilling, then download and install

هههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههههه معليش ترى فيه كلمات غير لائقة ( مالها داعي)

donations for the development Multi Theft Auto

Why mta sa make Donate ? : http://www.mtasa.com/donate/

yes, what can i do now ? i dont see option !

في المسار MTA San Andreas 1.3\server\mods\deathmatch\resources ولا MTA San Andreas 1.3\mods\deathmatch\resources ?